Run the installation file and select "Install".
Use the cable provided and plug it into the port labeled "PC" on the machine (avoid using the port for USB flash drives).
Once connected, you can start preparing files for your projects. How to setup and use a laser cutter with RD Works How to setup and use a laser cutter with RD Works
In the setup window, select your language and preferred unit of measurement (mm or inches). 2. Connecting the Machine
Once the software is installed, a menu typically appears to install the USB driver. This step is crucial for your computer to recognize the laser cutter. Run the installation file and select "Install"
In RDWorks, go to the bottom right settings panel and click "Test." If it says "Port test success," you are ready. 3. Basic Operations in RDWorks
For a more stable connection over long distances, you can configure a static IP address on both your PC and the machine. How to setup and use a laser cutter
Setting up and using a laser cutter with RDWorks involves a few key stages: installation, physical connection, and preparing your design for cutting or engraving. 1. Installation & Setup