Universal boards are picky about the file system and drive capacity.
: Once the blinking stops or the TV reboots, the update is finished. Remove the USB drive immediately so it doesn't try to re-flash on the next boot. 4. Post-Installation Configuration
: Disconnect the power cable from the LED TV/Monitor. Insert USB : Plug the USB drive into the board's USB port. Power On : Reconnect the power cable. Automatic Update : Most Download CV56XL 1920x1200 Firmware rar
: Common codes for this board include Menu + 1147 or Input + 2580 .
: Copy the .bin file directly to the root directory of the USB drive. Do not put it in a folder. 3. The Installation Process (USB Method) Universal boards are picky about the file system
boards will automatically detect the file. The standby light (usually red/blue) will start blinking rapidly.
: In the service menu, look for Panel Config or Special Set to adjust "Mirror Mode" or "LVDS TI Mode" to fix display orientation and color bit depth. 5. Troubleshooting Power On : Reconnect the power cable
: If the board doesn't start the update, try renaming the file to allupgrade_56_no_standby.bin or use a different USB drive.
